LTI 4-Ply Silicone 90 Degree Elbow Reducer Coupler – 3" To 3.25" ID – Black

Building a custom intake or intercooler setup?

This LTI silicone elbow is what you need.

It's a 90-degree reducer, going from 3 inches inside diameter down to 3.25 inches (yes, it's a step-up reducer).

Four-ply construction, so it's tough.

Glossy black finish, 5mm thick.

Handles up to 120 PSI working pressure, bursts at 275 PSI, and takes temps from -65°F to 500°F.

Perfect for performance or custom applications.

Made by LTI, part number SH-90D-R-2-2.5-BK.

If you're plumbing a turbo or supercharger, this coupler will handle the boost.

California Prop 65 warning applies.