4x Tie Rod End Ball Joint Support Boot - Rubber 20x36x33mm - Front Left Right - M012 / 1003-00012-4

Here's a set of four rubber boots for tie rod ends or ball joints.

The size is 20x36x33mm - that's 20mm inner diameter (small end), 36mm outer diameter (large end), and 33mm height.

These are the standard size for many front suspension applications.

They're made from quality rubber, designed to keep dirt and water out of your tie rod ends and ball joints.

When these boots tear, contaminants get in and the joint wears out fast.

Replace torn boots early and save the joint.

These fit on the left, right, and front positions - basically anywhere this size is needed.

The manufacturer is EU (brand), part number reference 1003-00012-4.

They're brand new, sold as a pack of 4 pieces.

Installation is straightforward: remove old torn boot, clean the joint, slide new boot on, secure with zip ties or small clamps if needed.

Much cheaper than replacing entire tie rod assemblies.

Keep your steering and suspension in top shape with fresh boots.

Made for the DIYer who wants to maintain their car properly.

If your boots are cracked and split, don't ignore them.

Grab this 4-pack and get those joints protected again.

Simple maintenance that prevents bigger problems down the road.