FK Bearing HC207-22 1-3/8 Bore Eccentric Locking Collar Insert Bearing – 1-3/8x72mm

This FK Bearing HC207-22 is a solid insert bearing with a 1-3/8 inch bore and an eccentric locking collar.

It's brand new, still in the original packaging, and made in China.

The model is HC207-22, and the MPN is the same, so no confusion there.

It's designed as an insert bearing, meaning it's meant to fit into a housing or pillow block.

The 1-3/8 inch bore is pretty standard for a lot of industrial and agricultural applications.

The eccentric locking collar helps keep the shaft secure and prevents slipping under load.

FK Bearing is a known manufacturer, so you can expect decent quality control.

Whether you're repairing a conveyor, a fan, or some farm equipment, this bearing should do the trick.

It's built to handle radial and moderate thrust loads.

Installation is straightforward if you're familiar with bearing fitments.

Just make sure the shaft is clean and the collar is properly locked.

These are common in all sorts of machinery, so having a spare on hand isn't a bad idea.

The 72mm outer diameter is standard for this series, so it should fit most HC-series housings.

If you're replacing a worn-out bearing, match the numbers and you're good to go.

FK Bearings are a solid choice for replacements—they get the job done without costing a fortune.

Definitely recommend for anyone needing a reliable insert bearing with an eccentric lock.

Good stuff for maintenance pros or DIYers working on equipment.